Manual Reset

You may need to do a manual reset in these cases:

1. You try to pair your SiNE CARD with a device, but it always fails.

2. You removed the SiNE CARD from your old device and want to pair it with a new one, but the card was not close to the old device when you removed it.

Reset Process

1. Locate the button on the bottom right corner of the SiNE CARD

2. Firmly double press the button. You will hear a beep.

3. Press and continue to hold the button.

4. After 5 seconds, the SiNE CARD will beep if successful.

5. Release the button.

Online Guide

https://www.sinetag.com/online-guide-SiNECARD/