0
Turn on Bluetooth
Make sure Bluetooth is turned on.
SiNE CARD
Apple Find My Online Guide
Set up, locate, charge, and manage your SiNE CARD.
01
Start here
Getting Started
This guide is for SiNE CARD - Apple Find My version.
This model is designed for Apple Find My and cannot be switched to Google’s Find Hub.
Connect to the internet
Your iPhone or iPad needs Wi-Fi or cellular access.
Keep the card nearby
Keep SiNE CARD close to your Apple device during setup.
02
First-time setup
Connect to Apple Find My
Activate SiNE CARD
Press the button once. A beep confirms that SiNE CARD is ready for setup.
Open Find My
Open Find My, tap Items, tap Add (+), then choose Add Other Item.
Connect SiNE CARD
Select SiNE CARD when it appears, then follow the onscreen instructions.
Finish setup
Choose a name for your SiNE CARD and complete registration to your Apple Account.
03
Everyday use
Using Find My
Map
View Location
See your SiNE CARD on the map. Find My shows its reported location and the time it was last updated.
Nearby
Play Sound
Play a sound to help locate SiNE CARD when it is nearby and reachable.
Maps
Get Directions
Open directions to its current or last known location.
Notifications
Notify When Found
If the item cannot be located, turn on Notify When Found to receive an alert when the Find My network detects it again.
Lost item
Show Contact Info
When supported by Find My, add a phone number or email address so someone who finds the item can contact you.
04
Account and card
Remove & Reset
Apple Account
Remove from Find My
Open Find My → Items → SiNE CARD, open the item options, then choose Remove Item and confirm.
Remove the card from the original Apple Account before another person tries to add it.
Card hardware
Reset SiNE CARD
- Firmly double-press the button. You will hear a beep.
- Press and continue to hold the button.
- After about 5 seconds, SiNE CARD beeps to confirm a successful reset.
- Release the button.
When to reset
Reset after removing the card if it needs to be paired again, or when preparing it for another Apple Account. Resetting the card does not remove it from the original Apple Account.
05
Power and pairing
Charging & Status
Charging methods
Charge SiNE CARD
- Magnetic pogo-pin charging cable
- Standard wireless charger
Red - Charging
Green - Fully charged
Button check
Check Pairing Status
Press the button twice, then listen for the status sound.
Two beepsPaired
Three beepsNot paired
06
Quick help
Troubleshooting & FAQ
SiNE CARD does not appear during setup.
Confirm Bluetooth and internet access are on, keep the card close to your Apple device, and press the card button once. In Find My, choose Add Other Item rather than AirTag.
Find My says the item is linked to another Apple Account.
The previous owner must remove SiNE CARD from their Apple Account in Find My before you can add it. A hardware reset alone does not remove the account link.
Play Sound does not respond.
Make sure SiNE CARD is powered on and move closer to its last known location. Play Sound is available when the card is nearby and reachable.
How do I connect SiNE CARD to a new iPhone?
If the new iPhone uses the same Apple Account, open Find My and check the Items tab. To move the card to a different Apple Account, remove it from the original account first, reset it, then follow the setup steps above.
When should I reset SiNE CARD?
Reset the card when pairing repeatedly fails after the usual checks, when re-pairing after removal, or when preparing it for another Apple Account. Always remove the item from the original Apple Account first when changing owners.